Techivation Logo

Cart

SUBTOTAL$0
M-Compressor

Techivation
M-Compressor

Discount Badge
63%OFF

M-Compressor is an advanced spectral audio compressor that offers both downward and upward compression, providing distortion-free dynamic processing for any sound. It comes with dynamic thresholds to ensure balanced compression across the spectrum, without over-compressing the low frequencies and under-compressing the highs.

$149.00Try it
Black Friday Sale Extended Until December 7.
Techivation Plugins Compatibility
Compatible with macOS and Windows.Available as VST, VST3, AU, and AAX. - Apple Silicon Chips

Smart solution for creators

Smooth, distortion-free audio compression

Introducing Techivation M-Compressor (OUT NOW!)
Techivation M-Compressor Walkthrough

Let's hear it in action

Sound Examples

M-Compressor
--:-- / --:--

Key Features

  • Down & Up Threshold

    ‘Down Threshold' defines the level above which the signal will be compressed downwards.

    ’Up Threshold' defines the level below which the signal will be compressed upwards.

  • Down & Up Ratio

    ‘Down Ratio’ controls the strength of downward compression. When set to 1.0:1, downward compression is disabled.

    ‘Up Ratio’ controls the strength of upward compression. When set to 1.0:1, upward compression is disabled.

  • Attack & Release

    ‘Attack’ controls how quickly the compressor responds to an increase in signal level, and ‘Release’ controls how long it takes to stop compressing once the signal level have subsided.

  • Intensity

    ‘Intensity’ controls how soft or hard the compression character is. Lower settings use softer knee with a limited compression range. Higher settings use harder knee and the full compression range.

  • Punch

    ‘Punch’ controls the amount of transient emphasis.

  • Tilt & Tilt Centre

    ‘Tilt’ sets the dB/octave slope of the spectral threshold tilt, and ‘Tilt Centre’ controls the centre frequency around which the spectral thresholds are tilted.

  • Analyser

    The spectrum analyser in M-Compressor visualises the input signal spectrum, the downward and upward spectral thresholds, and the spectral adjustments performed by the compressor.

  • Ext. Sidechain & sc-hp

    'Ext. Sidechain' enables the use of an external signal to drive downward compression. The sc-hp (sidechain highpass filter) cuts the lows in the sidechain frequency range from 10Hz up to 100Hz.

  • Dry-wet mix

    “Mix” control `allows to use M-Compressor for parallel compression. A common scenario would be to set up M-Compressor for an aggressive sound, and then blend it with the original signal by lowering the “Mix”. The “Make Up” gain is applied to the compressed signal before the “Mix”, so you can match the “before” and “after” levels for seamless parallel blending.

  • Diff & Sidechain

    'Diff’ lets you listen to the difference between processed and original signals, and ‘Sidechain’ lets you listen to the sidechain input.

  • Stereo Link

    ‘Stereo Link’ controls how M-Compressor responds to stereo signals. When it’s set to zero, the stereo channels are treated completely independently (dual-mono compression). At 100%, the spectral thresholds for the stereo channels are linked together, preserving the original stereo image after compression (stereo compression). Values between 0 and 100% allow you to find the right level of channel independence when compressing stereo signals.

  • Input-output-diff level meters

    Input-Output Level Meters are visual displays that show the audio levels of the input and output signals before and after processing.

    These meters provide real-time feedback on the input and output levels, allowing you to monitor the changes in amplitude that occur during the audio compression process.

  • Auto-Gain & Make Up

    ‘Auto Gain’ enables automatic control of 'Make Up Gain'. When 'Auto Gain' is disabled, the 'Make Up' parameter is set to the latest measured auto gain value.

  • Scaleable user interface

    The interface scaling feature in M-Compressor allows you to customize the size of the GUI to suit your preferences and optimize your workflow. With a range of scaling options available, from 50% to 150%, you can personalize the interface to match your visual and working style.

  • Internal On/Off Switch

    The plug-in features a dedicated bypass/on control, which allows for the swift enabling or bypassing of the effect. This user-friendly control is designed to help avoid potential clicks or audio artefacts that may occur when toggling the effect on or off directly within the DAW host.

  • Undo/redo options

    The M-Compressor plug-in comes equipped with the handy feature of built-in 'Undo' and 'Redo' options, providing added peace of mind while working on your audio processing. With these functions, you can easily revert to previous settings or redo changes that were made in error, saving time and eliminating the stress of potentially losing valuable adjustments.

  • A/B Switch

    The A/B buttons provide a convenient way to compare different options and find the optimal setting for your audio processing needs.

  • Tooltips

    M-Compressor features a handy 'tooltips' option that you can enable or disable from the plugin's menu. When this option is enabled, you can see a brief description of each part of the user interface by simply holding your mouse over that particular section.

M-Compressor Features

System
Requirements

Windows

7 and up as 64-bit VST and VST3, and 64-bit AAX (PT11 and up).

Mac OS

10.9 (OS X Mavericks) and higher as VST, VST3, AU, and AAX. Intel processors, and Apple Silicon Chips.

Download
Useful Resources

PDF User manualDownload Press KitHave questions? Contact us
Try for Free